Supplied Air Respirator System
Choose an air control device that best suits the need, whether it's cooling or heating. One variety of supplied air hoses rounds out a NIOSH-approved system. |
|||
 3M 25ft 1/2in Low Pressure Air Hose This low pressure air hose is 25 feet long, has a 1/2 inch inner diameter, and is equipped with MPT's on both ends to accept 3/8 inch FPT fittings. more info |
3M 50ft 1/2in Low Pressure Air Hose This low pressure air hose is 50 feet long, has a 1/2 inch inner diameter, and is equipped with MPT's on both ends to accept 3/8 inch FPT fittings. more info |
3M 100ft 1/2in Low Pressure Air Hose This low pressure air hose is 100 feet long, has a 1/2 inch inner diameter, and is equipped with MPT's on both ends to accept 3/8 inch FPT fittings. more info |
 3M 25ft 3/8in High Pressure Air Hose This supplied air hose is 25 feet long and has a 3/8 inch ID. The air hose is equipped with MPT fitting at both ends and accepts 1/4 inch FPT fittings. more info |
|
3M 50ft 3/8in High Pressure Air Hose This supplied air hose is 50 feet long and has a 3/8 inch ID. The air hose is equipped with MPT fitting at both ends and accepts 1/4 inch FPT fittings. more info |
3M 100ft 3/8in High Pressure Air Hose This supplied air hose is 100 feet long and has a 3/8 inch ID. The air hose is equipped with MPT fitting at both ends and accepts 1/4 inch FPT fittings. more info |
 3M 25ft 3/8in High Pressure Coiled Air Hose This supplied air hose is 25 feet long, has a 3/8 inch ID, and is equipped with MPTs on both ends to accept 1/4 inch FPT fittings. more info |
3M 50ft 3/8in High Pressure Coiled Air Hose This supplied air hose is 50 feet long, has a 3/8 inch ID, and is equipped with MPTs on both ends to accept 1/4 inch FPT fittings. more info |
|
3M 100ft 3/8in High Pressure Coiled Air Hose This supplied air hose is 100 feet long, has a 3/8 inch ID, and is equipped with MPTs on both ends to accept 1/4 inch FPT fittings. more info |
 3M Air Regulating Valve Assembly 3M Air Regulating Valve Assembly is designed to provide those 3M helmets, loose fitting facepieces and hoods, a continuous airflow of 6 to 15 scfm (170 to 425 lpm). more info |
 3M Bumpcap w/ Wide View Face Shield The bump cap is intended to be used in applications where protection from falling objects is not required, but a lightweight head cover is desired to protect the user from dust and other airborne particles. more info |
 3M Hardhat w/ Wide View Face Shield 3M Hardhat w/ Wide View Face Shield used in applications where ANSI Type I, II hardhat protection is needed. more info |
1 | 2
Back Support Belts -
Fall Protection -
Hard Hats -
Industrial Wipes -
Knee and Elbow Pads -
Fire Extinguishers -
Personal Safety Gas
Protective Clothing -
Rain Wear -
Safety Respirators -
Safety Glasses -
Safety Vests -
Two-Way Radios -
Work Gloves